Flexfinish HT is a premium high gloss, high solids thermoplastic anti-slip floor finish. Flexfinish HT is durable, easy to apply, anti slip and has outstanding wear and appearance. Typically four coat application required. Flexfinish HT is suitable wherever floor finishes are typically applied.
Coverage is about 2500 sq. ft. per gallon on non porous surfaces, one coat.
Flexfinish HT is a clear, self sealing, non powdering, non yellowing, versatile, easily applied, has excellent scuff & scratch resistance and is slip resistant, when dry. Recommended for all interior floors where a durable, gloss, slip resistant floor finish is required.
Features:
- Very durable • High Solids • Slip resistant
- Scuff and Scratch Resistant
- Simple application • Very hard wearing • Cost effective • Labor Saving
- Non Yellowing • Freeze / Thaw stable
- Excellent leveling characteristics
- 30 minute dry time
- Four coats suggested.
- If a more slip resistant floor finish is desired, please refer to Maxiflex HT Gloss.
For Bulk Order Quotations - Please Inquire
For more information, visit this product's Technical Data Sheet
For safety information, visit this product's Safety Data Sheet
Container sizes: 1 gallon (3.78 L), 5 gallon (18.9 L), or 55 gallon (207.9L) drums.
- Premium high gloss, slip resistant, versatile floor finish.
- Can be used on all types of resilient and hard floors including natural stone, ceramic tile, wood, concrete, rubber, VAT, VCT, lino and old vinyl asbestos tile.
- Flexfinish HT is durable, scuff, scratch, black heel mark, and UV resistant.
- Simple, safe, tough, highest quality, low end-use cost.
- The ultimate in floor care finish for abrasion resistance and durability.
- It helps repel impregnation of foreign particles and black heel marks.
- Reduced time between re-coating - ten minutes.
- Dramatically increases time between stripping.
- Clarity and leveling ability allows for traffic lane touch up and blending. No need to re-coat entire floor.
- Easy to remove if necessary (Flexstrip - product 8201).
- Use our Flexclean to clean and restore gloss and On Guard to degrease.
- Saves labor costs, easy to repair footprints in wet finish. Dries and cures from the bottom up usually in 10 minutes. Rapid coating is possible.
- Burnishing can speed-up the curing process and improve durability.
- Can be walked on wet without permanently harming the integrity of the floor finish.
- Savings as much as 20% in chemical costs and approximately 20% in labor costs over a three year period, when used as directed. Dries and cures in minutes to form a tough, flexible finish that is extremely durable.
- Because Flexfinish HT dries and cures from the bottom up, porosity and poor film integrity caused by the coalescent and out-gassing of top down drying is eliminated.
- Flexfinish HT is safer for the environment.
- Coverage of up to 2,500 sq. ft. /gal for re-coats, and 2500 sq. ft. per gallon after stripping for initial set-up for first 2 or 3 coats. Self-sealing and Self-restoring. UV Resistant.
- Easy to use, less fatigue, Higher productivity, easy to do repairs and blending.
- User-friendly, with virtually no mop drag. Resists alcohol, oils, medications and most food spills. Can be coated over a stable conventional finish or sealer.
